.png?sv=2022-11-02&spr=https&st=2025-06-18T07%3A42%3A06Z&se=2025-06-18T07%3A53%3A06Z&sr=c&sp=r&sig=78O8vtXroIfIpMk3OrcxqKi49Q74BRdiBc7Fh139tbM%3D "Header(2).png")
TICO Document #: SFN-20240918A
Description of Procedure: REPLACING FARIA BEEDE SPEEDOMETER & 4 IN 1 GAUGE. REPLACING GAUGE PANEL HARNESS. CURRENT FARIA 4 IN 1 GAUGE HAS BEEN DISCONTINUED. THE NEW 4 IN 1 GAUGE USES A DIFFERENT CONNECTOR AND REQUIRES THE LATEST SOFTWARE UPDATE IN THE SPEEDOMETER.
Parts Required: See Below
Planned Labor: N/A
When replacing part number 910336 with a 911141, the speedo and harness must also be changed.
If built with 910626 GAUGE -SPEEDO, 60 MPH, MG3000 SERIES W/LCD, FOR 2-WIRE SENDER the speedo needs to be replaced with 911139 GAUGE-SPEEDO, 60 MPH, MG3000 SERIES W/LCD, FOR 2-WIRE SENDER.
If built with 910623 GAUGE -SPEEDO, 100 KPH, MG3000 SERIES W/LCD the speedo needed to be replaced with 911142 GAUGE -SPEEDO, 100 KPH, MG3000 SERIES W/LCD.
Harness 620641 HARNESS-WIRE, 2017 CAB, SPEEDO AND GAUGE PANEL also needs to be replaced with 621799 HARNESS-WIRE, 2017 CAB, SPEEDO, GAUGE PANEL & 4 IN 1 DEUTSCH.
Refer to the photos below:
Left: Old 910336 Right: New 911141
